Mining Screen Panels Welded Wire Mesh Machine 5.5Kw Two Set Servo
Motor
I . Parameter setup and operating instructions for touch screen
- ON/OFF: switch on all the air-break switches, press “POWER ON” on
the operation panel, the system is energized; press “POWER OFF”,
the system is de-energized.
- Content of the main screen
- “Mail speed” (max. 2000 turn/m) × “Sp sevro rate” = “Sp sevro
speed” [speed at the side of motor]; “Mail speed” × “FeedSevro
rate” = “FeedSevro speed” [speed at the side of motor];
- “Sp sevro speed” represents the actual Sp sevro speed drum, unit:
0.1 turn/m; “FeedSevro speed” represents the actual moving
FeedSevro speed, unit: 0.1mm/m;
- “Pitch setting” = grating width + weld width to be welded, if the
grating width is “2.5mm”, the weld width shall be “0.15mm”, then
the “Pitch setting ” value is “2.65mm”, unit: 0.01mm;
- “length setting” represents the length of screen drum to be welded;
“length display” represents the length of screen drum welded. When
length display is equal to the length setting, the counting is
stopped ( press reset release);
- “Pitch adjustment” represents fine tuning while there are
differences between actual measuring weld and the setting value,
default as 100% (If the weld is larger, fine tuning to small, if
the weld is smaller, fine tuning to large);
- If the “length display” is larger than “actual measuring distance”,
it can decrease “counting numerator” or increase “counting
denominator”; and vice versa;
- “counting reset” represents feed length zero clearing or reset (the
reset button on panel has the same function);
- “servo reset” represents the reset while the servo is faulty;
- The front and back servo of the drum may be operated separately in
the actual work, default as “ double drive operation”, if
separately operate “front servo of the roller”, press “ X1 Action”,
if separately operate “back servo of the roller”, press “X2
Action”. Sp servo GearRatio
- “Sp servo GearRatio” and “feedSevro GearRatio” represents the Sp
servo (including secondary reduction) and feedsevro the
configuration ratio of the planetary reducer.
Stainless Steel AISI304 Weld Wire Mesh screens, also known as Wedge
wire, V-wire, and Triwire, are custom made for your application.
The features of this type of screen make it an attractive solution
for separating solids from liquids, retaining media, filtering,
sizing, dewatering, collecting, and distributing. Profile Wire
screen offers continuous slot openings that widen inwardly so that
particles tend to pass through the screen and reduce blinding.
How to weld the Stainless Steel Weld Wire Mesh by our machine
Our Weld Wire Mesh Welding Machine is an special equipment for
making wedge wire screen, wire wrapped screen, johnson screen, and
water well screen etc.
What is Fundamentals Of Weld Wire Mesh Machine?
Stainless Steel AISI304 Weld Wire Mesh Welding Machine For
Filtration And Sepration adopts Japanese Mitsubishi E60 CNC control
system.
Controlled by the Numeral control system, the servo motor drives
the ball screw as well as the drawing disk which is mounted on the
straight rail, so the slot clearance can be adjusted by touching
the control screen without stopping the machine.
It is easy to change the data on the touching screen.
Lock-expanding ring is equipped with the machine. After the
operator feeds the longitudinal wire, expand and lock the wire with
the ring.
It saves time and material during unload the filter tube.It is easy
to learn how to control the machine. It adopts Japanese Mitsubishi
E60 CNC control system.
Weld Wedge Wire Mesh screens Machine For Pharmaceutical Industry
2. Applications
AISI304 Weld Wire Mesh Machine, also named johnson screen welding
machine, is usually used in producing Oil sand control screen,
water well screen, the water, nozzles and so on. with screen media
higher precision, which is widely used in petroleum, chemical, and
paper industries.
3. Parameter
| NO. | ITEM | Data |
| 1 | Diameter of screen tube | Max.300mm, Min.50mm. |
| 2 | Max. Length of filter tube | 6000mm |
| 3 | Rod and wire diameter | 1.2mm to 3mm(profile wire) Please note that:you can also use the biger wire size ,while you
should be sure the biger size wire is used to weld the biger
diameter screen tube. |
| 4 | Material | Carbon steel, stainless steel |
| 5 | servo motor
| Two sets:5.5KW,One set:3.5KW
|
| 6 | Power of welding transformer | 200KVA |
| 7 | Welding speed is adjustable according to the tube diameter | Max.30rpm,6rpm |
| 8 | Slot(adjustable) | Min0.2mm,Max.16mm |
| 9 | precision of slot | ±0.03mm |
4. Renchun Weld Wire Mesh Machine Features and Advantages
A. Low noise
B. Less power consumption
C. Safety
D. Easy to operate
E. High welding precision
Advantages: Domestic famous bearings, Internal famous servo motor,
less power consumption, easily operation
Weld Wedge Wire Mesh screens Machine For Pharmaceutical Industry
5. Packing And Shipping
Wooden pallet and plastic package in the container.
